Boats are beautiful. But it’s also a complex piece of technical equipment with numerous systems. If something breaks down, the boat doesn’t work so well, or even at all, and she needs to be repaired.

This winter, Camille and Laure spent several months repairing what wasn’t working on board UtPåTur, and also making a few improvements. All this under the watchful eye of Uti, the gannet of UtPåTur, who will explain everything in detail.

First, a tractor with a large trailer came to pull the boat out of the sea. This way, we can also work on the hull of the boat without getting our feathers wet.

Underneath the boat is the centerboard, which raises and lowers. It’s lowered for sailing, but if you want to be able to beach, for example, you can retract it inside the boat.

During the refit, we completely removed the centerboard from the hull to repair it before putting it back in place. It was very heavy!

The engine propeller is also located under the boat. Even though UtPåTur is a sailboat, she still has an engine for maneuvering in harbors, or for making progress when there’s no wind at all!

This winter, we also dismantled the propeller and propeller shaft. The damaged parts were replaced with new ones that shouldn’t break down anytime soon this time!

Can you spot a difference on the boat’s hull between when UtPåTur is hauled out of the water on the tractor and when I show you the finished work?

Answer: the paint color, of course! It’s a special paint to prevent marine growth. It’s called antifouling.

At the stern of the boat, just below the radar, are the solar panels. They convert sunlight into electricity. This electricity is then stored in a battery, so there’s always power on board, even at night! This allows us to turn on the lights, charge our phones, and run the navigation equipment. Everything has been replaced: the panels, the batteries, and the cables! That way, we’re sure we won’t run out of power in the middle of the ocean.

There are so many systems to maintain on this boat! Those big cylinders on the deck are called winches. They rotate and allow you to wind and tighten the lines that adjust the sails.

Even though the winches were still working perfectly, as a precaution they were all disassembled and cleaned. Now they work even better!

And what’s this? Another winch, you think?

Almost. It’s a special winch used to haul up the chain and anchor. When they want to stop sailing, Laure and Camille can either go into a port or drop the anchor and chain overboard to secure the boat to the seabed. But the anchor and chain are very, very heavy to haul back on board afterward.

So they use this special winch, which is called a windlass, and it’s even electric! This winter they took it apart to clean it and installed a brand new, long chain.

And there you have it, the shipyard is over! But to continue taking care of UtPåTur during the journey, we’re taking plenty of spare parts on board so we can easily repair anything that breaks and keep moving forward.

This time you’re ready to set off around the world, aren’t you? I certainly am!

 PDF

Leave a Reply

Are you human? Please solve:Captcha